19
37
MUTE
Mutes the Media Player and the display flashes, pressing it again removes the mute and the display
returns to normal.
38
EQ
Through the settings between Eq0 and Eq5 it is possible to modify the frequency response of the Media
Player. The default equalization is Eq0 which is recalled each time the device is switched on. The
equalizations are as follows:
Eq0 = No equalization.
Eq1 = Voice Enhancement.
Eq2 = Enhancement of medium-high frequencies.
Eq3 = Enhancement of medium-low frequencies.
Eq4 = Strong high frequency enhancement.
Eq5 = Slight high frequency enhancement.
39
U/SD
In radio mode it stores FM radio stations based on signal reception from P00 to Pnn by scanning all
frequencies from 87.5MHz to 108MHz. If you press the button again before having scanned the entire FM
spectrum, the procedure is interrupted, therefore it is always advisable to let the memorization procedure
to be completed.
In USB / SD mode, if both cards are inserted, it switches playback between one card and the other.
40
RPT
In USB / SD mode, it activates the repeat which can be: ONE for the continuous repeat of the track being
played, ALL for the repeat of all the tracks contained in the USB / SD device. When the USB / SD device is
inserted, the media player restarts in ALL mode.
In the other modes it has no function.
41
0-9
In radio mode, pressing 001 to 0nn it selects the stored radio stations.
In USB / SD mode it skips to the track which, from the alphanumeric sequence determined by the file
name, results in the position of the number entered.
Summary of Contents for ATMP240ZXL
