background image

10

ENGLISH LANGUAGE
SAFETY AND PRECAUTIONS

• 

 

CAUTION:

 before using this product read carefully the following safety instruc  ons. Take a look of this manual en  rely and preserve it for 

future reference.
  When using any electric product, basic precau  ons should always be taken, including the following:
–  To reduce the risk, close supervision is necessary when the product is used near children.
–  Protect the apparatus from atmospheric agents and keep it away from water, rain and high humidity places.
–  This product should be site away from heat sources such as radiators, lamps and any other device that generate heat. 
–  Care should be taken so that objects and liquids do not go inside the product.
–  The product should be connected to a power supply mains line only of the type described on the opera  ng instruc  ons or as marked on the 
product. Connect the apparatus to a power supply using only power cord included making always sure it is in good condi  ons.
– 

 

WARNING:

 The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

–  Power supply cord should be unplugged from the outlet during strong thunderstorm or when le   unused for a long period of   me.
–  Do not place objects on the product’s power cord or place it in a posi  on where anyone could trip over, walk on or roll anything over it. Do not 
allow the product to rest on or to be installed over power cords of any type. Improper installa  ons of this type create the possibility of 

fi

 re hazard 

and/or personal injury.

IN CASE OF FAULT

•  In case of fault or maintenance this product should be inspected only by quali

fi

 ed service personnel when:

–  There is a 

fl

 aw either in the connec  ons or in the supplied connec  ng cables.

–  Liquids have spilled inside the product.
–  The product has fallen and been damaged.
–  The product does not appear to operate normally or exhibits a marked change in performance.
–  The product has been lost liquids or gases or the enclosure is damaged.
•  Do not operate on the product, it has no user-serviceable parts inside, refer servicing to an authorized maintenance centre.

CE CONFORMITY

•  Proel products comply with direc  ve 2004/108/EC (EMC), as stated in EN 55013 standard and with direc  ve 2006/95/CE (LVD), as stated in EN 
60065 standard.
•  Under the EM disturbance, the ra  o of signal-noise will be changed above 10dB.

PACKAGING, SHIPPING AND COMPLAINT

•  This unit package has been submi  ed to ISTA 1A integrity tests. We suggest you control the unit condi  ons immediately a  er unpacking it.
•  If any damage is found, immediately advise the dealer. Keep all unit packaging parts to allow inspec  on.
•  Proel is not responsible for any damage that occurs during shipment.
•  Products are sold “delivered ex warehouse” and shipment is at charge and risk of the buyer.
•  Possible damages to unit should be immediately no  

fi

 ed to forwarder. Each complaint for package tampered with should be done within eight 

days from product receipt.

WARRANTY AND PRODUCTS RETURN

•  Proel products have opera  ng warranty and comply their speci

fi

 ca  ons, as stated by manufacturer.

•  Proel warrants all materials, workmanship and proper opera  on of this product for a period of two years from the original date of purchase. If 
any defects are found in the materials or workmanship or if the product fails to func  on properly during the applicable warranty period, the owner 
should inform about these defects the dealer or the distributor, providing receipt or invoice of date of purchase and defect detailed descrip  on. 
This warranty does not extend to damage resul  ng from improper installa  on, misuse, neglect or abuse. Proel S.p.A. will verify damage on returned 
units, and when the unit has been properly used and warranty is s  ll valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible 
for any "direct damage" or "indirect damage" caused by product defec  veness.

INSTALLATION AND DISCLAIMER

•  Proel products have been expressly designed for audio applica  on, with signals in audio range (20Hz to 20kHz). Proel has no liability for damages 
caused in case of lack of maintenance, modi

fi

 ca  ons, improper use or improper installa  on non-applying safety instruc  ons.

•  Proel S.p.A. reserves the right to change these speci

fi

 ca  ons at any   me without no  ce.

•  Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of maintenance, improper use, installa  on not performed 
with safety precau  ons and at the state of the art.

POWER SUPPLY AND MAINTENANCE

•  Clean only with dry cloth.
• Before connec  ng the product to the mains outlet make certain that the mains line voltage matches that shown on the rear of the product, a 
tolerance of up to ±10% is acceptable.

Summary of Contents for MI16

























Reviews: