13
OPERATION GUIDE
SOUND MODE
Set the No. 9 on the ON position to active the Sound Mode.
Combine the position of the switches from No. 1 to No. 8 to select
the desired effect.
AUTOMATIC MODE
Set the switches No. 9 and the No. 10 on the OFF position, the LED
PAR will work in automatic mode. The running speed of the shows
will be adjust by switches No. 7 and No. 8 positions. The colour is
selected by switches No.1 – No.2 – No.3 (separately for RGB) while
the flashing speed by switches No.4 – No.5 – No.6.
CONNECTION WITH A DMX CONTROLLER
To control the LED PAR by an external DMX controller, set the
No.10 switch on the ON position.
The address code of each LED is programmed by switches.
See the following tab to have the dipswitches position in relation
with address code.
