Maintenance
150
Reinstallation Procedure
Introduction
In certain cases, it may be necessary to reinstall the operating system.
Precautions to be taken:
Keep static-producing materials (plastic, upholstery, carpeting) out of the
immediate work area.
Do not remove ESD-sensitive components from their anti-static bags until you are
ready to install them.
When handling static-sensitive components, wear a properly grounded wrist
strap (or equivalent).
Avoid unnecessary contact with exposed conductors and component leads with
skin or clothing.
Before Reinstallation
Hardware required:
Reinstallation DVD-ROM
External DVD drive, compatible with DVD+R DL format, and with USB connection
for Industrial Personal Computer without DVD drive.
Setting up the hardware:
Shut down Windows® in an orderly fashion and remove all power from the
device. Then, follow the applicable instructions described in
Uninterruptible
Power Supply (UPS) (see page 124)
.
Disconnect all external peripherals.
NOTE:
Save all important data on the hard drive or Compact Flash card (the
reinstallation process will erase all data). The reinstallation process will return the
computer to its factory settings.
Reinstallation
Refer to the relevant procedure in "PS4000 Series Installation Guide" in a package.
Summary of Contents for PS-4700 Series
