INSTALLATION & OWNERS MANUAL
1. Technical Specifications
Power Input
220V AC
±
10% 50~60Hz
Reception
frequency
433.92MHz
Motor
24V DC
Decoding
Rolling Code
Working Temperature
>-20
℃, <+50℃
Transmitter
power
27A 12V Battery
Relative Humidity
≤90℃
Globe
24V 5W
Open and close force
1000N 1200N 1500N 1800N
Courtesy
light time
3 minutes
This manual is only used by technical persons who are qualified to carry out the
installation.
No given information in this manual can be considered of any interest to the end user.
No setting or adjustments contained in this manual can be carried out by the end user.
It is important for the installer to show their clients correct operationl using of the opener
including the using of manual disengagement cord.
Inform the owner about the need of a regular and accurate maintenance, especially
regarding a regular check of the safety and reversing devices.
IMPORTANT NOTE:
A poorly operating door can affect the life of the automatic opener due to
incorrect loads, and will void the warranty.
Check the reversing sensitivity at least twice a year, and adjust if it is necessary.
Make sure that the safety devices are working effectively (photo beams, etc.)
2. Installation
2.1 Recommended Tools
