10. Owners’ Guide
8.1
Attention in use
10.1.1
At the first time of using the door, please test the driving system to see if it moves
well. (Test method: unlock the trolley, pull and push the door by hand.)
10.1.2
Connected with the appropriate power and socket by professionals, and connected
the earthing wire with earth.
10.1.3
Using the transmitters in your sight. Do not stand or walk under a moving door. The
transmitters should be out of reaching of children.
10.1.4
Make sure the door our off fire, moisture, electromagnetism and some other
places.
10.1.5
Check at least twice a year to make sure the door is properly balanced and that all
working parts are in good working condition. Adjust the tensile force of chain. Add
suitable amount of lubricant to the active.
10.2
Examination Guide
10.2.1
Problem
Causes
Solution
10.2.2
The chain is noisy.
The chain is too loose.
Adjust nut-M8 referring to
3.2.C.
10.2.3
The motor does not
work.
The socket is not well connected or
the fuse is broken.
Check the socket or replace
the fuse.
10.2.4
After setting open and
close positions, the
motor does not work.
The screws of fixing the Hall
components are loose or program
mistakes.
Tighten the screws or
resetting open and close
positions.
10.2.5
The door can’t be
closed.
Photo beam function works.
Cancel the photo beam
function, referring to 6.6.
10.2.6
The wall button works
well, but the
transmitter doesn’t
work.
No transmitter learning or
transmitter battery is power off.
Code referring to 6.4 or
change new transmitter
battery.
10.2.7
Transmitter distance is
too short.
The transmitter battery is nearly
power off.
Change new battery.
