English
71
Table: Cutting step versus cutting length
Cutting step
Cutting length
1=
approx. 3.0 mm
3=
approx. 6.0 mm
5=
approx. 10.0 mm
7=
approx. 13.0 mm
9=
approx. 16.0 mm
Charging the Unit
• Turn the unit off. “0” can be seen on the switch (6).
• Connect the power adaptor connector with one of the following jacks.
• The socket directly at the bottom end of the unit (5).
• Alternatively place the unit in the charging station. The socket is at the rear.
• Plug the power adaptor into a 230 V/50 Hz wall outlet.
• The indicator light remains red during the charging process.
NOTE:
The charge indicator
does not
indicate the state of charge of the rechargeable battery.
• Charge the unit before first use for 10 hours.
NOTE:
• After initial use, do not charge the battery for longer than 8 hours at one time.
• If the battery is empty, the appliance can be operated from the mains. To do so, con-
nect the adapter directly to the clipper.
CAUTION:
After 8 hours always disconnect from mains power supply.
Summary of Contents for PC-HSM/R 3052 NE
Page 124: ...25 06 19 PC HSM R 3052 NE Internet www proficare germany de Made in P R C Stand 2019 06 ...
Page 125: ......
Page 126: ......
