PC-MPS3004_IM
21.08.17
46
Notes on Use
• This appliance is only intended for treating hands (manicure) and feet (pedicure).
• Do not use the appliance on cracked skin or open wounds!
• Do not use on birthmarks.
• Consult your doctor first in case of diabetes, haemophilia, or immunodeficiency.
• Regularly check the results during use in order to avoid injuries. This especially
applies for people with diabetes, since they are less sensitive to pain on hands
and feet.
• Excessive use can cause skin irritations. In such a case, stop using the appliance
until any redness has disappeared.
• Do
not
apply too much pressure. Guide the attachment with slight movements
around the spot to be treated.
• Always work very carefully!
• Pay attention to any accumulation of heat, e. g. when filing callus on feet. This
especially applies to people who are not sensitive to heat.
• Hard skin can be removed easily when dry. Do not remove the complete callus in
order to maintain the natural protection of the skin.
Water or skin lotions impair the progress of treatment. If necessary, briefly wash
your feet and then dry thoroughly.
NOTE:
To prevent the skin from cracking, apply a moisturising lotion after treatment.
Using the Appliance
NOTE:
Wash your hands and feet or apply lotion to them only after treatment.
1. Turn off the appliance by setting the switch of the motor unit to
0
.
2. Connect the power adapter to the socket.
3. Connect the power adapter to a certified wall socket.
4. Attach the required attachment. Remove / attach the attachments by simply slid-
ing them off or onto the shaft of the motor unit.
5. Turn on the appliance. The appliance features 5 speed settings for both the clock-
wise and the anticlockwise rotation. Start with the low speed setting.
6. Gently run the attachment past the treatment area.
7. In order to prevent injuries, check the progress of the treatment continuously at
short intervals.
