31
Special safety information for this unit
WARNING:
• Bread can burn. Therefore never use the
appliance near or below combustible materials
such as curtains.
• During operation the temperature of the
exposed surface may be very hot.
A risk of
burning
exists when removing smaller slices
of bread.
• Do not operate the device with an external timer
or separate remote control system.
• Always watch the unit while it is being used!
• Do not insert forks, knives or other objects in the
toasting slot.
• Do not insert your ingers into the toasting slots.
Intended use
This appliance is designed to toast slices of bread
and rolls by using the toasting attachment.
It is intended for domestic use and use of similar
areas. It may only be used in the manner described
in this instruction manual. The appliance may not
be used for commercial purposes.
Any other use is considered as not intended and
may lead to damage of property or even to per-
sonal injury.
The manufacturer assumes no liability for damage
which may occur through incorrect use.
Description of parts
1 Toasting slot
2 Display
2.1 “Warming” indicator
2.2 Time indicator
2.3 Setting
2.4 “Defrost” indicator
3 Sliding lever
4 Control panel
4.1
“Reduce” setting button
4.2 “Increase” setting button
4.3
“Stop” button
4.4
“Defrost” button
4.5
“Warming” button
5 Crumb tray
Supplied parts
1 Automatic toaster with crumb tray
1 Toaster attachment
Unpacking the appliance
1. Remove the packaging of the appliance.
2. Remove all packaging material such as plastic
ilm, iller material, cable ties and box
packaging.
3. Check that all the parts are in the box.
NOTE:
There may still be dust or production residues on
the appliance. We recommend that you clean the
appliance as described under “Cleaning”.
Instructions
Before Initial Use
CAUTION:
In order to remove the protective layer on the
heating coil you should operate the machine
approximately three times when it is empty.
Please select the maximum level of browning.
NOTE:
Any smoke or smells produced during this
procedure are normal. Please ensure suficient
ventilation.
Mains Lead
Unwind the required mains lead from the base.
Operation
• Only connect the unit to a properly installed and
earthed power socket (220 – 240 V~, 50 Hz).
• Use the
/ buttons to select one of the
6 settings. The setting and a time between 1:20
and 4:40 minutes will appear on the display.
