General safety at work
1. keep the workplace clean and well lit Using power tools in a crowded, dark
workplace can be tempting
2.do not use power tools in environments where there is a risk of explosion
(e.g. in environments where flammable liquid, gas or dust is present). a spark
from a power tool can ignite the dust or gas
3.please keep children or other persons away when working with power
tools. Distractions during operation can cause you to lose control of the tool.
Personal safety
1. stay awake at work and use tools and aids correctly Tools should not be
used if you are tired or under the influence of drugs, alcohol or treatment. A
slight distraction while operating a power tool can cause serious injury.
2. use safety equipment. Use safety glasses. The correct use of safety
equipment such as dust masks,
non-slip safety shoes, safety helmets or
hearing protectors can reduce personal injury.
3. prevent accidental starting. Before plugging the plug into the socket, check
that the tool switch is off. After switching on, fingers often cannot press on
the switch; do not plug the tool into a power outlet with the switch on,
otherwise accidents may occur.
4. before starting the power tool, you must remove the adjusting spanner or
the spanner. If the paddler or tool is left on the rotating part of the power
tool, there is a risk of injury.
5. do not reach over the tool when working to recover and work on it. When
working, you must adopt a correct posture and stand firmly so that you have
better control over the power tools in the event of an unexpected event.
