operation to be performed. Hazards may occur when power tools are used
for operations other than those intended.
Maintenance:
Maintenance of power tools should be entrusted to a professional and
original accessories should be used for maintenance to ensure the safety of
the power tools.
Bit change:
The supplied bits additionally adhere magnetically in the device. To change
the bits, pull them out carefully. Then insert the desired bit until it is properly
fixed.
Charging:
Charge the unit using the supplied micro-USB cable. To do this, plug the
narrow end of the cable into the end of the device and connect the other end
of the cable to a USB socket. The LED indicator shows the charge status.
When all lights are brightly lit, the unit is sufficiently charged.
Operation:
Determine the direction of movement of the unit by pressing the large keys
on the unit accordingly. Press the small key to activate/deactivate the light at
the front end of the unit.
ATTENTION!!!
The returns will be impossible if products were damaged because of
incorrect use.
