background image

9

PSI1165G-001_v01

Hints for ironing

1

 Sort out the articles to be ironed according to the type 

of  fabric.  This  will  minimize  the  frequency  of  temperature 

adjustment for different garments.

2

 Test ironing a small area on the backside or inside the 

garment if you are unsure about the type of fabric. Start with 

a low temperature and increase gradually.

3

 Wait for about three minutes before ironing heat sensitive 

fabrics. Temperature adjustment needs certain time to reach 

the required level no matter it is higher or lower.

4

 Delicate fabrics such as silk, wool, velour, etc. are best 

ironed with an ironing cloth to prevent shine marks.

5

 You may need a few times of press to activate the spray, 

burst and vertically burst function.

6

 Read the garment labels and follow the manufacturer’s 

ironing  instructions  which  are  often  shown  by  symbols 

similar to the following:

Temperature settings

 

Acetate

 

Elastics

 

Polyamide

 

Polypropylene

 

Cupro

 

Polyester

 

Proteins

 

Silk

 

Triacetate

 

Viscose

 

Wool

 

Cotton

 

Linen

Technical data

The iron technical parameters are included at the name plate.

The iron is I class appliance, equipped with supplying cord 

and plug with grounding. 

PROFiLO iron meets the requirements of effective standards.

This  device  complies  with  Commission  Regulation  (EC) 

no. 1275/2008 on eco-design requirements.

The  appliance  meets  the  requirements  of  the  following 

directives:

 

Electrical  equipment  designed  for  use  within  specific 

voltage limits (LVD) – 2006/95/EC.

 

Electro-Magnetic Compatibility (EMC) – 2004/108/EC.

The product is marked with CE symbol on the name plate.

Features

1

 Steam Control

2

 Steam Burst Button

3

 Spray Button

4

 Self-Clean Button

5

 Temperature Indicator

6

 Temperature Dial

A

 

Never direct the steam to human or 

pets.

 

The iron must not be left unattended 

while  it  is  connected  to  the  supply 

mains.

 

CAUTION!

Not observance can result in 

damage to possessions

 

Remove any protective films or stickers from the sole 

plate and the cabinet.

 

Unwind and straighten the power cord before usage.

 

Fill the water using included vessel for water.

 

Keep the power cord away from the soleplate.

 

Make  sure  that  the  voltage  on  the  rating  plate 

corresponds to that of your power grid.

 

Always  connect  the  iron  to  a  suitable  mains  supply 

outletm  (AC  only),  with  grounding,  which  voltage 

complies with the voltage indicated on the appliance 

nameplate.

 

Do  not  use  an  extension  power  cord  set  without 

grounding!

 

Do not add perfume, vinegar or other chemical liquids 

into  the  water  tank;  they  can  damage  the  appliance 

seriously.

 

Do  not  immerse  the  appliance  in  water  or  any  other 

liquid.

 

Do not wrap the power cord around the unit for storage 

until it has cooled down completely.

 

Do not attempt to open the cabinet or dismantle any 

parts from the appliance.

 

The appliance is not intended to be operated by means 

of an external timer or separate remote-control system.

 

If you do not use the iron, even for short time, switch it 

off, turning Temperature Dial in anti-clockwise direction 

to 

„MIN”

.

 

If you are not going to use the iron even for a short 

period of time, turn off the steam function by setting the 

steam control to   position.

 

Use “SELF CLEANING” function at least once a month.

 

 

SUGGESTION

Information on the product and 

suggestions for its use

 

The iron is intended for domestic usage only and you 

can use it solely according to herewith manual.

Summary of Contents for PSI1165G

















Reviews: