10
PREPARING FOR FLIGHT
Power on the drone by pressing the
power button on the underside of the
aircraft. Then press and hold the power
button for 3 seconds, the light will flash
for around 3 seconds.
Turn on the controller by pressing the power
button, and the indicator light shown will appear.
When the light on the front of the aircraft comes
on and the light on the rear slowly flashes, the
controller has been successfully connected.
COMPASS CORRECTION
Press and hold the geomagnetic correction button until you hear a bleep
and the front and rear lights of the drone flash. Pick up the drone with the
base facing the ground and rotate until you hear a bleep. The front lights
will flash and the rear light will stay solid. Face the
drone’s camera to the
ground and rotate until a bleep is heard, when the rear light flashes
compass correction is successful.
Push the throttle lever and the direction lever
in the direction shown to unlock the aircraft
for take-off.
