background image

3 of 20 

 

SAFETY WARNINGS 

Read the entire instruction manual and familiarise yourself with the product 
and all its features before operating.  Failure to operate the product correctly 
can result in damage to the product, surroundings or even serious injury.  This 
product is not a toy and must be operated with caution and common sense.  It 
requires some basic mechanical knowledge.  This product is not intended for 
use by children without direct adult supervision.  This manual contains 
instructions for safety, operation and maintenance.  It is essential to read and 
follow all the instructions and warnings in this manual prior to assembly, setup 
or use in order to operate correctly and avoid damage or serious injury. 

  Not intended for use by children under 14 years of age.  This is not a toy. 

  Always operate your drone in open spaces away from vehicles, buildings, 

traffic and people. 

  Always keep out of reach of children. 

  Avoid exposure to water as moisture can cause damage to the electronics. 

  Never operate your drone with low transmitter batteries. 

 

The battery charger included with the drone has been designed to safely 

charge the Li-Po battery. 

  Mishandling of Li-Po batteries can result in a fire, personal injury, and /or 

property damage. 

  By handling, charging or using the included Li-Po battery you assume all 

risks associated with lithium batteries. 

  If at any time the battery begins to balloon or swell, discontinue use 

immediately.  If charging or discharging, discontinue and disconnect.  
Continuing to use, charge or discharge a battery that is ballooning or 
swelling can result in fire. 

  Always store the battery at room temperature in a dry area for best results. 

  Do not store battery or drone in a car or direct sunlight.  If stored in a hot 

environment, the battery can be damaged or even catch fire. 

Summary of Contents for ORBIT PFBD201





















Reviews: