14
AFTER FLIGHT
Once your flight has completed, and the propellers have stopped spinning
1)
Pick up the drone and hold the power button on the battery to turn the
drone off.
2)
Fold the arms of the drone until they sit close to the body of the drone. The
rear legs must be folded first, followed by the front legs. DO NOT FORCE THE
ARMS AWAY FROM THE BODY AS THIS MAY RESULT IN DAMAGE.
3)
Turn the controller off using the POWER button.
4)
Place the drone and accessories back into the storage case.
5)
The drone should be fully charged before a period of storage to protect the
battery.
REPLACEMENT OF THE PROPELLERS
Should one of the propellers become damaged, it can be replaced, by removing
the two screws, from the top of the propeller then sliding the propeller off the
motor shaft. Refitting is the reversal of removal.
It is important for the correct blade to be placed on the correct motor or the
aircraft will not fly correctly. Each blade is marked with an A1 or B1 on the top to
indicate which motor it corresponds to.
