background image

15

 HOW TO USE THE MANUAL MODE

1.  Turn on the console.

 

 Press any button or begin pedaling to turn on the 
console. 

 

 When you turn on the console, the display will turn 
on. A tone will sound and the console will be ready 
for use.

2.  Select the manual mode.

 

 When you turn on the con-
sole, the manual mode will 
be selected automatically. 

 

 If you have selected a 
workout, reselect the man-
ual mode by pressing the 
Workouts button repeatedly 
until a track appears in the 
upper display.

3.   Begin pedaling and change the resistance of 

the pedals as desired.

 

 As you pedal, change 
the resistance of the ped-
als by pressing the Digital 
Resistance increase and 
decrease buttons. 

 

 Note: After you press the 
buttons, it will take a moment 
for the pedals to reach the 
selected resistance level. 

 4.  Follow your progress with the display.

 

 The display can show the following workout 
information:

 

 Calories

——This display mode will show the approx-

imate number of calories you have burned.

 

 

Distance

——This display mode will show the 

distance that you have pedaled in miles or 
kilometers. 

 

 

Profile

——When a workout is selected, this display 

mode will show a profile of the resistance settings 
of the workout.

 

 

Pulse

——This display mode will show your heart rate 

when you use the handgrip heart rate monitor (see 
step 5).

 

 

Resistance (Res)

——This display mode will show 

the resistance level of the pedals for a few seconds 
each time the resistance level changes. 

 

 

Scan

——This display mode will show the calories, 

distance, speed, and time display modes, for a few 
seconds each, in a repeating cycle.

 

 

Speed

——This display mode will show your pedaling 

speed in miles per hour or kilometers per hour. 

 

 

Time

——When the manual mode is selected, this 

display mode will show the elapsed time. When a 
workout is selected, this display mode will show the 
time remaining in the workout.

 

 

Track

——When the manual 

mode is selected, this 
display mode will show a 
track representing 1/4 mile 
(400 m). As you exercise, 
indicators will appear in 
succession around the 
track until the entire track 
appears. The track will then 
disappear and the indicators 
will again begin to appear in 
succession. 

 

 Press the Display button repeatedly to view the 
desired workout information. 

 

 Change the volume level 
of the console by pressing 
the volume increase and 
decrease buttons.

 

 Note: The console can show 
pedaling speed and distance 
in either miles or kilometers. 
To change the unit of measurement, see THE 
SETTINGS MODE on page 17.

Summary of Contents for 120 R Bike

























Reviews: