8
4. Have a second person hold the console assem-
bly near the Uprights (91, 92).
Connect the Upright Wire (93) to the Console
Wire (114).
See the inset drawing. The con-
nectors should slide together easily and
snap into place.
If they do not, turn one con-
nector and try again.
IF YOU DO NOT CON-
NECT THE CONNECTORS PROPERLY, THE
CONSOLE MAY BECOME DAMAGED WHEN
YOU TURN ON THE POWER.
Next, remove
the wire tie from the Upright Wire. Insert the
connectors down into the Right Upright (92).
114
Console
Assembly
4
92
93
91
114
Wire
Tie
93
3. With the help of a second person, lower the
treadmill off the cardboard stand. The stand will
be used again in assembly step 9.
Identify the Right Upright Sleeve (90) and the
Left Upright Sleeve (89); the Upright Sleeves
are labeled “Right” and “Left.” Slide the Right
Upright Sleeve onto the Right Upright (92), and
slide the Left Upright Sleeve onto the Left
Upright (91).
89
“Right”
Cardboard
Stand
“Left”
90
3
92
91
