background image

14

HOW TO USE THE MANUAL MODE

Press the Resistance decrease button or

begin pedaling to turn on the console.

A moment after you turn on the console, the dis-

play will light.

Select the manual mode.

Each time you turn on the console, the manual

mode will be selected automatically. If you have

selected a program, reselect the manual mode by

pressing the Programs button repeatedly until the

words MANUAL MODE appear in the top of the

display.

Begin pedaling and change the resistance of

the pedals as desired.

As you pedal, change the resistance of the ped-

als by pressing the Resistance increase and

decrease buttons repeatedly. There are ten resis-

tance levels. Note: After you press the buttons, it

will take a moment for the pedals to reach the

selected resistance level. 

Follow your progress with the display.

The left side of the

display—The left

side of the display

will show the elapsed

time. Note: When a

program is selected,

the display will show the time remaining in the

program instead of the elapsed time. An exception

is the heart rate control program, which shows the

elapsed time. 

The left side of the display will also show your

heart rate when you use the handgrip pulse sen-

sor (see step 5 on page 15). 

When a program is selected, the left side of the

display will also show the approximate number of

calories you have burned.

The center of the

display—When you

select the manual

mode, the center of

the display will show a

track that represents

640 revolutions. As you exercise, indicators will

appear in succession around the track until the

entire track appears. The track will then disappear

and the indicators will again begin to appear in

succession.

The center of the dis-

play will also show the

resistance setting of

the pedals for a few

seconds each time the

resistance setting

changes.

The right side of the

display—The right

side of the display will

show the distance

(total revolutions) you

have pedaled and

your pedaling pace, (revolutions per minute [rpm]).

The top of the display—When you select the

manual mode, the top of the display will show the

approximate number of calories you have burned

and the approximate number of grams of carbs

you have burned. 

4

3

2

1

Summary of Contents for 160 Elliptical





























Reviews: