11
13. While a second person holds the Console (7)
near the Upright (4), connect the wires on the
Console to the Upper Wire (152), to the Right
and Left Sensor Wires (108, 110), and to the
Extension Wire (162).
Insert the excess wire into the Upright (4) or into
the Console (7).
Tip: Avoid pinching the wires.
Attach the
Console (7) to the Upright (4) with four M4 x
12mm Screws (148).
12.
IMPORTANT: If you purchase the optional
chest heart rate monitor (see page 22), see
step 17 on page 13 to install the receiver
included with the heart rate monitor.
Orient the Rear Console Cover (80) as shown.
Attach the Rear Console Cover (80) to the
Upright (4) with four M4 x 16mm Screws (101).
12
13
80
108,
110
148
152
162
4
4
7
101
101
Avoid pinching
the wires
