5
M8 Split
Washer (72)–4
M6 Locknut
(56)–4
M8 Locknut
(66)–4
M10 Split
Washer (54)–3
M6 x 38mm Button
Bolt (57)–4
M10 x 17mm
Screw (55)–3
M4 x 4.5mm
Screw (70)–1
M4 x 16mm
Screw (77)–4
M8 x 16mm
Screw (84)–2
M8 Washer
(85)–2
Wave Washer
(78)–2
M10 x 78mm Screw (65)–2
M10 x 22mm
Screw (4)–5
ASSEMBLY
Assembly requires two persons.
Place all parts of the exercise bike in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires an adjustable wrench
and a Phillips
screwdriver
.
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly.
Note: If a part is not in the hardware kit, check to see if
it has been preassembled. To avoid damaging parts, do not use power tools for assembly.
