21
FEATURES OF THE CONSOLE
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable.
When you use the manual mode of the console, you
can change the resistance of the pedals and the incline
of the ramp with the touch of a button.
While you exercise, the console will display continu-
ous exercise feedback. You can also measure your
heart rate using the handgrip heart rate monitor or the
optional chest heart rate monitor.
The console offers a selection of onboard workouts.
Each workout automatically changes the resistance of
the pedals and the incline of the ramp and prompts you
to vary your pedaling pace as it guides you through an
effective workout. You can also set a calories, distance,
or time goal.
The console also features an iFit mode that enables
the console to communicate with your wireless network
through an optional iFit module. With the iFit mode,
you can download personalized workouts, create your
own workouts, track your workout results, race against
other iFit users, and access many other features.
To purchase an iFit module at any time, go to
www.iFit.com or call the telephone number on the
front cover of this manual.
You can even connect your MP3 player or CD player
to the console sound system and listen to your favorite
music or audio books while you exercise.
To turn on the power,
see this page.
To use the
manual mode,
see page 22.
To use an onboard
workout,
see page 24.
To use a set-a-goal work-
out,
see page 25.
To use an iFit workout,
see page
26.
To use the sound system,
see page 27.
To
change console settings,
see page 28.
Note: If there is a sheet of plastic on the display,
remove the plastic.
HOW TO TURN ON THE POWER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before you turn on the power. If you do
not do this, you may damage the console displays
or other electrical components.
Plug in the power cord (see
HOW TO PLUG IN THE
POWER CORD on page
17). Next, locate the
power switch on the frame
near the power cord. Press
the power switch to the
reset position.
The display will then turn on and the console will be
ready for use.
Note: When you turn on the power for the
rst
time, the incline of the ramp may calibrate auto-
matically.
The ramp will move upward and downward
as it calibrates. When the ramp stops moving, the ramp
is calibrated.
IMPORTANT: If the incline of the ramp does not
calibrate automatically, see HOW TO CALIBRATE
THE RAMP on page 30 and manually calibrate
the ramp.
IMPORTANT: The console features a display demo
mode, designed to be used if the elliptical is dis-
played in a store. If the demo mode is turned on,
the console will not turn off and the display will not
be reset when you
nish exercising. To turn off the
demo mode, see step 3 on page 28.
Reset
Position
