ProForm colling breeze 495Pi, User Manual

13

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Before folding the treadmill, adjust the incline to the 
lowest position. If this is not done, the treadmill may be per-
manently damaged. Next, unplug the power cord. CAUTION:
You must be able to safely lift 20 kg (45 lbs.) to raise, lower,
or move the treadmill.

1.  Hold the treadmill with your hands in the locations shown at

the right. 

To decrease the possibility of injury, bend your

legs and keep your back straight. As you raise the tread-
mill, make sure to lift with your legs rather than your
back.

Raise the treadmill about halfway to the vertical posi-

tion. 

2. Move your right hand to the position shown and hold the

treadmill firmly. Using your left thumb, press the storage latch
to the left. Raise the treadmill until the storage latch closes
over the catch. 

Make sure that the storage latch is fully

engaged over the catch. 

To protect the floor or carpet from damage, place a mat
under the treadmill. Keep the treadmill out of direct sun-
light. Do not leave the treadmill in the storage position in
temperatures above 30° C (85° F).

HOW TO MOVE THE TREADMILL 

Before moving the treadmill, convert the treadmill to the storage
position as described above. 

Make sure that the frame is se-

curely held by the storage latch.  

1.  Hold the upper ends of the handrails. Place one foot on the

base as shown.

2.  Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location. 

To re-

duce the risk of injury, use extreme caution while mov-
ing the treadmill. Do not move the treadmill over an un-
even surface.

3.  Place one foot on the base, and carefully lower the treadmill

until it is resting in the storage position.

Base

Front Wheels

Engaged

Catch

Storage 

Latch