6.
Put a 2-lb. Weight (79) on the upper hooks on the Right
Weight Rack (99). Put a 4-lb. Weight (80) on the centre
hooks on the Right Weight Rack. Put a 6-lb. Weight
(81) on the lower hooks on the Right Weight Rack.
Put the remaining Weights on the Left Weight Rack
(not shown).
7.
Remove the backing from the Adhesive Clip (129).
Press the Adhesive Clip onto the base of the Uprights
(102) in the indicated location. Press the Allen Wrench
(116) into the Adhesive Clip.
8.
Make sure that all parts of the CROSSTRAINER
are properly tightened. To protect the floor or car-
pet from damage, place a mat under the
CROSSTRAINER.
6
7
79
80
81
99
116
102
129
5.
Slide the Lock Pin Collar (84) and the Spring (83) onto
the Lock Pin (87). Insert the Lock Pin into the left
Upright (102) and the Left Weight Rack (82). Tighten
the Treadmill Knob (78) onto the Lock Pin.
5
87
83
84
82
102
78
4.
Locate the Left Weight Rack (82), which can be identi-
fied by the hole near the top. Attach the Left Weight
Rack to the left Upright (102) with six Weight Rack
Screws (77).
Attach the Right Weight Rack to the right Upright in the
same manner (not shown).
4
77
82
102
Hole
77
7