ProForm PFTL17112.0, User Manual

27

 HOW TO CHANGE CONSOLE SETTINGS

The console features a settings mode that allows you 
to view usage information, to personalize console set-
tings, and to set up and manage a wireless network 
connection.

1.  Select the settings mode.

 To select the settings mode, hold down the Stop 
button while inserting the key into the console and 
then release the Stop button. The settings mode 
will then appear in the display.

 The time display will show the total number of 
hours that the treadmill has been used. 

 The distance display will show the total number 
of miles (or kilometers) that the walking belt has 
moved. 

2.  Navigate the settings mode menu.

 While the settings mode is selected, the matrix 
will display several optional screens. Press the 
decrease button next to the Enter button to select 
each of the optional screens.

 The lower section of the display will show instruc-
tions for the selected optional screen. 

Make sure 

to follow the instructions shown in the lower 
part of the display.

3.  Change settings as desired.

Demo

——The console features a display demo 

mode, designed to be used if the treadmill is dis-
played in a store. While the demo mode is turned 
on, the console will function normally when you 
plug in the power cord, press the power switch 
into the reset position, and insert the key into the 
console. However, when you remove the key, the 
displays will remain lit, although the buttons will not 
function. If the demo mode is turned on, the word 
ON will appear in the matrix. To turn on or turn off 
the demo mode, press the Enter button.

Units

——The selected unit of measurement will 

appear in the matrix. To change the unit of mea-
surement, press the Enter button. To view distance 
in miles, select ENGLISH. To view distance in 
kilometers, select METRIC.

 Default Menu

——The default menu will appear when 

you insert the key into the console or when you 
press the Home button. Press the Enter button 
repeatedly to select the manual main screen or the 
iFit screen as the default menu.

 Firmware Update

——

For the best results, 

regularly check for firmware updates.

 Note: The matrix will display NOT CONNECTED if 
the console is not connected to a wireless network.

 Press the Enter button to check for firmware 
updates using your wireless network. If an update 
is available, the update will begin automatically. 

 IMPORTANT: To avoid damaging the treadmill, 
do not turn off the power while the firmware is 
being updated. The update may take several 
minutes.

 Note: Occasionally, a firmware update may cause 
your console to function slightly differently. These 
updates are always designed to improve your exer-
cise experience.

 Default Settings

——To restore the console to its 

factory default settings, press the Enter button. 
Note: The console will erase any information that 
you have saved in its memory.

 The 

WiFi––Normal

 option will allow you to set up 

a wireless network connection using the console. 
See step 4 on page 28 for instructions.

 The 

WiFi––WPS

 option will allow you to set up 

a wireless network connection using your WPS 
router. See step 5 on page 28 for instructions.

 The 

WiFi––Advanced

 option will allow you to set up 

a wireless network connection using your com-
puter, smart phone, tablet, or other Wi-Fi device. 
See step 6 on page 29 for instructions.

 Connect to iFit Account

——To set up a different iFit 

account, but maintain the existing wireless connec-
tion, follow the instructions in the matrix. 

Note: This option will rarely be used.