29
6. Use WiFi–Advanced to set up a wireless
connection.
This option will allow you to set up a wireless
network connection using your computer, smart
phone, tablet, or other Wi-Fi device.
On your computer, smart phone, tablet, or other
Wi-Fi device, open the list of available networks
to which your device can connect. One of the
options will be IFIT_SETUP; select this network. If
this network does not appear, make sure that your
Wi-Fi device is within range of the console, and
then close and re-open your list of networks. Also,
see Clear WiFi Setting on page 28 and clear any
previous wireless network settings on the console.
Note: The network IFIT_SETUP will not appear
if the console has already been configured to
connect to a wireless network.
The console will display an IP address, such as
192.168.0.1:8080. Open a web browser on your
computer, smart phone, tablet, or other Wi-Fi
device. Next, type in the IP address on the con-
sole into the URL bar in your browser. Example:
http://192.168.0.1:8080.
Your browser will load a web page. If the web page
does not appear, double-check the IP address and
the previous instructions of this step. Follow the
instructions on the web page to connect the tread-
mill to your wireless network.
Note: A warning may appear stating that the server
cannot be identified. If this happens, make sure
that you have entered the IP address correctly.
If you cannot complete any part of this
process, or if you have any questions, go to
support.iFit.com for assistance.
7. Exit the settings mode.
To exit the settings mode, remove the key from the
console.
HOW TO USE THE IPAD HOLDER
IMPORTANT: The iPad Holder was designed for use
with most full-size iPads. Do not place an iPad mini
or any other electronic device or object in the iPad
Holder.
To insert an iPad into
the iPad Holder (92),
set the bottom edge
of the iPad in the tray.
Then, pull the clip
over the top edge of
the iPad.
Make sure
that the iPad is firmly
secured in the iPad
Holder.
Reverse these
actions to remove the iPad from the iPad Holder.
Rotate the iPad Holder (92) to the desired angle.
Tray
Clip
92
Summary of Contents for PFTL17112.0
Page 5: ...5...
