background image

THE INFORMATION MODE/DEMO MODE

The console features an information mode that keeps
track of the total number of hours that the treadmill has
been operated and the total number of miles that the
walking belt has moved. The information mode also 
allows you to switch the console from miles per hour to
kilometers per hour. In addition, the information mode
allows you to turn on and turn off the demo mode.

To select the information mode, hold down the Stop
button while inserting the key into the console. When
the information mode is selected, the following informa-
tion will be shown:  

The Distance/Incline/Laps 
display will show the total 
number of miles that the walk-
ing belt has moved. 

The Time/Segment Time dis-
play will show the total num-
ber of hours the treadmill has
been used. 

An “E,” for english miles, or
an “M,” for metric kilometers,
will appear in the Speed/Min-
Mile display. Press the Speed

s

button to change the unit of

measurement. 

IMPORTANT: The
Calories/Heart Rate display
should be blank. 

If a “d” ap-

pears in the display, the con-
sole is in the “demo” mode.
This mode is intended to be
used only when a treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the displays and indicators on the console
will automatically light in a preset sequence, although
the buttons on the console will not operate. 

If a “d” ap-

pears in the Calories/Heart Rate display when the
information mode is selected, press the Speed 

t

t

button so the display is blank. 

To exit the information mode, remove the key from the
console.

THE OPTIONAL CHEST PULSE SENSOR

The optional chest pulse sensor offers hands-free
operation and continuously monitors your heart rate
during your workouts. 

To purchase the optional

chest pulse sensor, call toll-free 1-800-734-2377.

OPTIONAL HAND WEIGHTS

Optional hand weights
let you exercise your
upper body while you
walk on the treadmill.
The hand weights fit
into convenient holders
in the console. 

To pur-

chase hand weights,
call toll-free 1-800-
772-0257.

20

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for PFTL79103































Reviews: