background image

16

If the speed or incline settings are too high or too
low, you can manually override the settings at any
time by pressing the Speed or Incline buttons on
the console. However,

when the next “chirp” is

heard, the speed and/or incline will change to
the next settings of the CD or video program.

To stop the walking belt at any time, press the
Stop button on the console. The Time/Segment
Time display will begin to flash. To restart the pro-
gram, press the Start button or the Speed 

s

s

but-

ton. After a moment, the walking belt will begin to
move at 1.0 mph. 

When the next “chirp” is

heard, the speed and incline will change to the
next settings of the CD or video program

. The

program can also be stopped by pressing the
Stop button on your CD player or VCR.

When the CD or video program is completed, the
walking belt will stop and the Time/Segment Time
display will begin to flash. Note: To use another
CD or video program, press the Stop button or re-
move the key and go to step 1 on page 15.

Note: If the speed or incline of the treadmill
does not change when a “chirp” is heard:

• make sure that the iFit.com indicator is lit and

that the Time/Segment Time display is not
flashing

• adjust the volume of your CD player or VCR. If

the volume is too high or too low, the console
may not detect the program signals

• make sure that the audio cable is properly

connected, that it is fully plugged in, and that
it is not wrapped around a power cord

• if you are using your portable CD player and

the CD skips, set the CD player on the floor or
another flat surface instead of on the console.

Follow your progress with the LED track and
the displays.

See step 5 on page 10. 

Measure your heart rate, if desired.

Refer to step 6 on page 11.

When the program is completed, remove the
key.

When the program is completed, remove the key
from the console. Keep the key in a secure place.

Note: If the displays and various indicators on
the console remain lit after the key is removed,
the console is in the “demo” mode. Refer to
page 18 and turn off the demo mode.

When you are finished using the treadmill, move
the on/off switch near the power cord to the off 
position and unplug the power cord.

7

6

5

Summary of Contents for PFTL79190



























Reviews: