16
THE INFORMATION MODE
The console features an information mode that keeps
track of treadmill usage information. The information
mode also allows you to select miles or kilometers as
the unit of measurement, to adjust the contrast of the
display, and to turn on and turn off the demo mode.
To select the information mode, hold down the Stop
button, insert the key into the console, and then release
the Stop button. When the information mode is se-
lected, the following information will appear in the dis-
play:
A number from 1
to 20 will appear
in the upper part
of the display.
This number is
the contrast set-
ting of the dis-
play; 1 is the lowest setting and 20 is the highest set-
ting. To change the contrast of the display, press the
weight increase and decrease buttons.
The center of the
display will show
the number of
hours that the
treadmill has
been operated.
The lower right
corner of the display will show the total number of miles
or kilometers that the walking belt has moved.
In addition, an “E” for English miles or an “M” for metric
kilometers will appear in the lower left part of the dis-
play. To change the unit of measurement, press the
Speed increase button.
IMPORTANT:
If a “d” appears in the display, the con-
sole is in the “demo” mode. This mode is intended to be
used only when the treadmill is displayed in a store.
When the console is in the demo mode, the power cord
can be plugged in, the key can be removed from the
console, and the indicators in the display will automati-
cally appear in a preset sequence; the buttons on the
console will not operate.
If a “d” appears when the in-
formation mode is selected, press the Speed de-
crease button so that the “d” disappears.
To exit the information mode, remove the key from the
console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free oper-
ation as it continuously tracks your heart rate during
your workouts.
To purchase the optional chest
pulse sensor, call toll-free 1-888-533-1333.
