8
Small
Hole
71
5. Hold the Console Base (47) near the Left Handrail (71).
Attach the two ground wires on the Console Base to the
indicated small hole in the Left Handrail with the Silver
Ground Screw (75).
47
75
Ground
Wires
5
47
6. Set the Console Base (47) on the Right Handrail (72) and
the Left Handrail (71). Attach the Console Base with four
1/2” Screws (48).
Start all four Screws before tighten-
ing them; do not overtighten the Screws.
48
48
72
71
6
4. With the help of another person, carefully lower the
Uprights (69) as shown. Note: It may be helpful to place
one foot on one of the Extension Legs (63) as you tip the
Uprights.
Make sure that the Extension Legs remain
in the Uprights.
Attach each Extension Leg (63) with two Base Pad
Screws (39) and a Base Pad (57) as shown.
Attach the
lower Base Pad Screw, without the Base Pad, first.
Attach two Base Pads (57) to the base of the Uprights
(69) with two Base Pad Screws (39).
Next, attach the two Wheels (66) with two Wheel Bolts
(64), four Wheel Spacers (108), and two Wheel Nuts
(32) as shown.
Do not overtighten the Wheel Nuts;
the Wheels should turn freely.
With the help of another person, carefully raise the
Uprights (69) to the vertical position.
39
69
63
39
57
63
57
57
39
64
66
108
108
32
69
64
66
108
108
32
57
39
4
