3
6
Bodypack TXBPDW Transmitter
1.
Power/Mute switch
2.
TB3M-type connector receives
TA3F-type terminated connection
3.
Battery compartment
4.
Antenna
5.
LED indicator light
Operating Instructions
• Insert new high quality alkaline batteries into your transmitter.
• Utilize the flexible output format of the receiver to match your
application. Connect to mixer or amplifier appropriately.
• Power up the receiver.
• Power up the transmitters.
• The RF indicator light will show connectivity between the receiver
and the transmitter. The AF indicator light shows the presence of
an audio source.
4
5
3
2
1
Channelization
The PDW system is available in the following frequencies:
AA = 902.9MHz / 915.5MHz
AB = 909.3MHz / 926.8MHz
