8
Breaker/Fuse has been
tripped.
Please check your electrical box to
confirm the breaker has not been blown.
This may occur if the unit is sharing a
receptacle with another high power
consuming appliance. Ensure unit is in
OFF position. Plug in unit and attempt to
turn on again.
Attempt to plug unit into another
independent receptacle in the house.
The power
indicator light is
illuminated, but
no heat disperses
from the unit
Room temperature has been
warmed up to thermostat setting
To resume heating, adjust thermostat
temperature to a higher setting. Refer to
THERMOSTAT section on page 6 for
more information.
The caution light
is illuminated
The heater as reached potentially
unsafe high temperatures.
Turn heater off and allow it to cool for 5-
10 minutes. Once heater has cooled off,
check to make sure there are no objects
on or very close to the unit. To resume
operation, plug unit back in once it has
cooled off.
The heater is
creating a
burning smell.
A drop of oil fell on the heating
coil during the manufacturing
process. It will quickly evaporate
and should not occur again.
Ensure room in which heater is situated is
well ventilated.
Check & ensure there are no
combustible materials 3' (0.9 m)
surrounding the heater.
Remove the combustible units preventing
air intake into the heater.
PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF.
DOING SO COULD VOID THE WARRANTY AND CAUSE DAMAGE OR PERSONAL
INJURY.
WARRANTY INFORMATION
This product carries a one (1) year warranty against defects in workmanship and materials.
Profusion Heat agrees to replace a defective product, within the stated warranty period, when
returned to the place of purchase with proof of purchase. This product is not guaranteed against
wear or breakage due to misuse and/or abuse.
