background image

 

IMPORTANT INSTRUCTIONS 

PLEASE READ ALL INSTRUCTIONS BEFORE USING THIS HEATER. 
WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS 
BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL 
INJURY, INCLUDING THE FOLLOWING: 
 
 
When  switching  on  the  appliance  for  the  first  time,  allow  it  to  run  at  full  power  for 
about two hours to get rid of the unpleasant smell. Make sure that the room in which 
the appliance is located is well ventilated during this operation. It is normal for the 
appliance to emit small cracking sounds when you turn it on if the first time.   
 

1.

  Read all instructions before using this heater. 

2.

  This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. 

Use handle when moving the unit. Keep flammable materials such as furniture, pillows, 
bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front and top of 
the heater and keep them away from the sides and rear of the heater. Keep the rear 
grille away from walls or drapes so as not to block the air intake.   

3.

  Extreme caution and supervision is necessary when any heater is used near children or 

invalids and whenever the heater is left operating and unattended. 

4.

  Always unplug heater when not in use. 

5.

 

Do not use any heater 

with a damaged cord or plug or after the heater malfunctions or 

has been dropped or damaged in any manner. Discard heater or return to an 
authorized service facility for examination and/or repair. 

6.

  Do not use outdoors. 

7.

  This heater is not intended for use in bathrooms, laundry areas or other similar indoor 

locations. Never locate heater where it may fall into a bathtub or other water container. 

8.

 

Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar 
coverings. Do not route cord under furniture or appliances. Arrange cord away from 
traffic areas and place it where it will not be tripped

 over. 

9.

  To disconnect heater, turn controls to off, then remove plug from outlet. 

10.

 

This appliance has a polarized plug (one blade is wider than the other). This plug is 
intended to fit a polarized outlet only one way. If the plug does not fit fully in the outlet, 
reverse the plug. If it still does not fit, consult a qualified electrician. Do not connect the 
heater to extension cords, surge protectors, timers, direct breakers, or an outlet with 
other appliances connected to the same outlet. 

Risk of fire, overheat, malfunction, 

property damage, injury, or even death may result if not adhered to!

 

11.

  Connect to properly polarized outlets only. 

12.

  Do not insert or allow foreign objects to enter ventilation or exhaust openings, as this 

may cause an electric shock or fire, or damage the heater. 

13.

  To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not 

use on soft surfaces, like a bed, where openings may become blocked. 

 

Summary of Contents for FH128B








Reviews: