background image

 

14.

  A heater has hot and arcing or sparking parts inside. Do not use it in areas where 

gasoline, paint, or flammable liquids are used or stored. 

15.

  Use this heater only as described in this manual. Any other use not recommended by 

the manufacturer may cause fire, electric shock, injury to persons or other damage to 
property. 

16.

  This heater must be plugged into a 120V, 15 amp (or more) circuit of its own. Nothing 

else can be plugged into the same circuit. If unsure if you home meets this specification, 
consult a certified electrician prior to use. 

Risk of fire, overheat, malfunction, 

property damage, injury, or even death may result if not adhered to!

 

17.

  To prevent overload and blown fuses, be sure that no other appliance is plugged into 

the same outlet or into another outlet wired into the same circuit. 

18.

 

It is normal for the heater’s plug and cord to feel warm to the touch. A plug or cord that 
becomes hot to the touch or becomes distorted in shape may be a result of a worn 
electrical outlet. Worn outlets or receptacles should be replaced prior to further use of 
the heater. Plugging heater into a worn outlet/receptacle may result in overheating of 
the power cord or fire. 

19.

  Ensure the heater is on a stable, secure surface to eliminate the potential of tipping 

over. 

20.

  Always plug heaters directly into a wall outlet/receptacle. Never use with an extension 

cord or relocatable power tap (outlet /power strip). 

21.

  Be sure that the plug is fully inserted into appropriate receptacle. Please remember that 

receptacles also deteriorate due to aging and continuous use: check periodically for 
signs of overheating or deformations evidenced by the plug. Do not use the receptacle 
and CALL your electrician. 

22.

  Check that neither the appliance nor the power cable has been damaged in any way 

during transportation. 

23.

  Make sure that no pieces of polystyrene or other packaging material have been left 

between elements of the appliance. It may be necessary to pass over the appliance 
with a vacuum cleaner. 

24.

  This appliance is not intended for use by persons (including children) with reduced 

physical, sensory or mental capabilities, or lack of experience and knowledge, unless 
they have been given supervision or instruction concerning use of the appliance by a 
person responsible for their safety. Children should be supervised to ensure that they 
do not play with the appliance. 
 

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully 

insert. 

 

 

SAVE THESE INSTRUCTIONS 

 

 

Summary of Contents for FH128B








Reviews: