10
WARNING -
The heater must be properly installed before it is
used.
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR
ARC FLASH:
Apply appropriate personal protective equipment (PPE)
and follow safe electrical work practices. See NFPA 70.
A circuit breaker must be installed and serviced only by
qualified electrical personnel.
Always use a properly rated voltage sensing device to
confirm power is off.
The Select switch on the heater is only for function
selection. Use circuit breaker as power ON/OFF
device. The circuit breaker is to be installed by
certified electrician and shall be located in line of
sight from the heater location or shall be capable of
being locked in open position. Follow the operating
instruction to reduce the risk of fire, electric shock,
injury or death to persons.
Switch on the circuit breaker.
Insert the batteries to the remote controller as below images:
NOTE
: Remove the batteries if the remote control is not to be
used for a month or more. Batteries left in the unit may leak
and cause damage.
OPERATING INSTRUCTIONS
