REHATEAM s.r.l.—vicolo Negrelli
5
—
31040
Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual CARBOMAX 15
SERVICE MANUAL
FOOTPLATE DISTANCE
Tubes with holes
Screw off the bolt
A
of both side of the frame.
Slide the tubes to the necessary height.
Make sure the height of the two sides is the same.
Insert the bolt
A
paying attention to fitting it with no effort into the
threaded hole
B
on the rear side of the support
C
.
The footplate tube’s holes and the hole of the support
B
must be
aligned.
Finally, tighten the bolt
A
on both sides of the frame.
Do not force
screwing the bolt, you may damage the thread of the
hole
B
. Should that occur, you can remedy by pass the threaded hole
with a M5 tap starting from the rear side of the support. If the thread is
too damaged to be repaired, you can pass the hole with a 5 mm drill
bit and fix the tube with a longer bolt, washer and nut.
You can change the support
C
only if you cut the frame 3 cm and
glue, with epoxy glue, the new support.
C
B
ANTERIORE POSTERIORE
(A)
C
A
A
