Easy Tilt 14
2.5
Push handlebar
You can adjust the height of the push handlebar by changing its inclination.
Take hold of both joints, press the button
P
with your index finger and swing the pivot joint upward or downward. When you release the button, the joint will lock to the new position.
OPTION HEIGHT ADJUSTABLE PUSH HANDLEBAR
This adjustment is additional to the one above mentioned.
You can adjust the push handlebar
M
by means of the posts, but also by changing the inclination of the pivot joint.
You can also detach it from one or both joints to fold the wheelchair.
Height adjustment using posts
Loosen the lever
L
of both supports
T
just enough to let the posts slide to the desired height. Check for equal height of both
posts to ensure the handlebar is horizontal. Once the desired height has been set, securely tighten both levers
L
.
On the lower side of both posts, you will see a safety detent rivet
V
that prevents the post to come off accidentally or
deliberately from the support
T
.
Important warning for the assistant: the push handle posts are safe only when the two levers L are tightly
fastened; this condition prevents the posts from sliding up or down or even coming off accidentally.
Before pushing the wheelchair, make sure the two posts are safely locked.
Rehateam s.r.l. is not liable for any damage or injury caused by failure to heed this warning.
You must remove the armrests to fold/unfold the backrest.
M
Summary of Contents for EASY TILT
