Easy Tilt 34
4.
The restraint belt symbol (Fig. F) on the wheelchair frame shows the
position of the wheelchair restraint belt. Once the front belts have been
fitted, the belts are tightened to secure the wheelchair.
5.
The fixing points of the restraint belts are, for each side of the wheelchair,
the lower/front/external side of the tilt-in-space unit (see fig. G) and the
lower/rear/internal side of the tilt-in-space unit (see fig. H).
6.
The restraint belts must be fixed to the anchor rings.
OCCUPANT WEIGHT LESS THAN 22 kg.
If the wheelchair occupant is a child whose weight is 22 kg or less and the
vehicle carries less than eight (8) passengers, we recommend use a child
restraint system (SRB) compliant with UNECE rule no. 44.
This type of restraint system allows for a more efficient anchorage with
respect to the 3-point conventional one; furthermore, some SRB systems also
include postural supports to help keep the child in correct position when
seated.
In some circumstances, parents or assistants may decide to leave the child
on the wheelchair during transport due to the degree of control of the posture
and comfort afforded by the wheelchair. In this case, we recommended
requesting the health carer or other competent person to perform a risk
assessment.
FIG. F
FIG. G
FIG. H
Summary of Contents for EASY TILT
