Easy Tilt 37
7
ACCESSORIES
Each model can be equipped with various accessories that should be evaluated according to the needs of the occupant and assistant.
Some of the images in this manual may show a wheelchair model different from the one under discussion.
However, all instructions are relevant, regardless of model differences
.
7.1
Narrow passage transit wheels
This accessory becomes necessary when the dimensions of the wheelchair impede getting into or passing through narrow rooms such as a door or a lift.
To use this accessory, you should remove the rear wheels.
This makes the wheelchair narrower and shorter.
You can remove the transit wheel from its support.
Press the pin
A
that holds it and slide the post off the support
B
.
To put on the transit wheel, insert the post in the support
B
until the pin
A
touches the support itself.
Then, press the pin and slide the post in until the pin locks in the hole in the support.
For a correct assembly of the transit wheel, remember that when inserting it into the support, the pin A should always face toward the inside of the wheelchair.
Remember that while using the transit wheels (with the rear wheels removed), the parking brakes will not work at all.
The stability of the wheelchair resting on the wheels for narrow passages is reduced, therefore pay great attention and seek help from an assistant.
A
A
B
Summary of Contents for EASY TILT
