Easy Tilt 40
7.3
Tipping aid
This accessory has been designed to enable the assistant to tip back the wheelchair without a
great effort to facilitate negotiating small steps. With one foot, press down on the plastic support
while, at the same time, applying downward force onto the push handles.
With
“L
-
shape”
post (1)
You can remove the tipping aid by pressing the pin
A
that secures it and sliding the post from the
support
B
.
To fit the tipping aid, slide the post in the support
B
until the pin
A
touches the support.
Then, press the pin and slot the post in until the pin locks through the hole of the support.
With standard rubber pedal (2)
This is part of the standard anti-tip wheel
–
see chapter “
anti-tip wheel
” –
and has the same
function as th
e “L
-
shape” tipping aid.
.
7.4
Crutch support
This accessory holds crutches on the wheelchair without interfering with its normal use.
Put the ends of the crutches into the cup
A
and fasten their upper ends using the strap
B
fixed to the backrest post.
You can easily remove the post with the cup by pressing the pin
D
and sliding the post off the support.
To fit the post with the cup, insert the post into the support
C
until the pin
D
touches the support itself. Then, press the pin and slide the post in until the pin locks in the support hole.
A
B
C
D
A
B
1
2
Summary of Contents for EASY TILT
