3.
Close the oven door halfway to the first
opening position. Then pull forward and
remove the door from its seat.
4.
Put the door on a soft cloth on a stable
surface.
5.
Release the locking system to remove
the internal glass panel.
6.
Turn the two fasteners by 90° and
remove them from their seats.
90°
7.
First lift carefully and then remove the
glass panel.
1
2
8.
Clean the glass panel with water and
soap. Dry the glass panel carefully.
When the cleaning is completed, install the
glass panel and the oven door. Do the
above steps in the opposite sequence.
The screen-printing zone must face the
inner side of the door. Make sure that after
the installation the surface of the glass
panel frame on the screen-printing zones is
not rough when you touch it.
Make sure that you install the internal glass
panel in the seats correctly.
Progress
23