Tank empty indicator
The indicator
shows that the tank is
empty and must be refilled.
For more information refer to "Steam
Cooking".
Tank Full indicator
The indicator
shows that the oven is
prepared for steam cooking.
If you put too much water into
the tank, the safety outlet moves
the excess water to the bottom
of the oven.
Remove the water with a
sponge or cloth.
Emptying the water tank
CAUTION!
Make sure that the
appliance is cool before you
start to empty the water tank.
1.
Prepare the draining pipe (C), included
in the same package with the user
manual. Put the connector (B) onto one
of the ends of the draining pipe.
2.
Put the second end of the draining pipe
(C) into a container. Put it at a lower
position than the outlet valve (A).
B
C
A
3.
Open the oven door and put the
connector (B) into the outlet valve (A).
4.
Push the connector again and again
when you empty the water tank.
The tank can have some
water when the tank empty
indicator
is on. Wait until
the water flow from the
water outlet valve stops.
5.
Remove the connector from the valve
when the water stops flowing.
Do not use the drained water to
fill the water tank again.
CLOCK FUNCTIONS
Clock functions table
Clock function
Application
Time of day
To set, change or check the time of day.
Minute Minder
To set countdown time. This function has no effect on the opera-
tion of the appliance.
Duration
To set the cooking time of the oven.
End
To set the time of day when the oven should deactivate.
Progress
9
