2. Place the rear part of the drawer (1) on
the rails.
2
1
3. Keep the front of the drawer (2) lifted
up while pushing the drawer in.
4. Press the front part of the drawer
downwards.
Pull out the drawer again and
check if it is placed correctly on
both rear and front hooks.
Temperature indicator
For proper storage of food the refrigerator
is equipped with the temperature indicator.
The symbol on the side wall of the
appliance indicates the coldest area in the
refrigerator.
If OK is displayed (A), put fresh food into
area indicated by symbol, if not (B), wait at
least 12 hours and check if it is OK (A).
If it is still not OK (B), adjust the setting
control to a colder setting.
OK
OK
A
B
Fan
The refrigerator compartment is equipped
with a device that allows rapid cooling of
foods and keeps more uniform
temperature in the compartment.
This device activates automatically when
needed.
It is also possible to switch on the device
manually when needed (refer to "Fan
function").
The fan operates only when the
door is closed.
HINTS AND TIPS
Hints for energy saving
• Most efficient use of energy is ensured
in the configuration with the drawers in
the bottom part of the appliance and
shelves evenly distributed. Position of
the door bins does not affect energy
consumption.
• Do not open the door frequently or
leave it open longer than necessary.
• Do not set too high temperature to save
energy unless it is required by the
characteristics of the food.
• If the ambient temperature is high and
the temperature control is set to low
temperature and the appliance is fully
loaded, the compressor may run
continuously, causing frost or ice
formation on the evaporator. In this
case, set the temperature control
toward higher temperature to allow
automatic defrosting and to save
energy this way.
• Ensure a good ventilation. Do not cover
the ventilation grilles or holes.
Progress 29
