The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
Shopping function
If you need to insert in the fridge
compartment a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the
Shopping function to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
1. Press the Functions until the
corresponding icon appears.
The Shopping indicator flashes.
2. Press the OK to confirm.
The Shopping indicator is shown. The fan
activates automatically for the function
duration.
This function stops automatically after
approximately 6 hours.
You can deactivate the Shopping function
before its automatic end by repeating the
procedure or by selecting a different fridge
set temperature.
FastFreeze function
The FastFreeze is used to perform pre-
freezing and fast freezing in sequence of
Freezer compartment. This function
accelerates the freezing of fresh food and,
at the same time, protects foodstuffs
already stored from undesirable warming.
To freeze fresh food activate
the FastFreeze function at least
24 hours before placing the
food to complete pre-freezing.
1. To activate this function press the
Functions button until the
corresponding icon appears.
The FastFreeze indicator flashes.
2. Press the OK button to confirm.
The FastFreeze indicator is shown.
This function stops automatically after 28
hours.
You can deactivate the FastFreeze
function before its automatic end by
repeating the procedure until the
FastFreeze indicator turns off or by
selecting a different set temperature.
Fan function
The refrigerator compartment is equipped
with a device that allows rapid cooling of
food and keeps more uniform temperature
in the compartment.
This device activates automatically when
needed or manually.
To switch on the function:
1. Press the Functions button until the
corresponding icon appears.
The Fan indicator flashes.
2. Press the OK button to confirm.
The Fan indicator is shown.
To switch off the function repeat the
procedure until the Fan indicator goes off.
If the function is activated
automatically the Fan indicator
is not shown (refer to "Daily
use").
The activation of the Fan
function increase the energy
consumption.
The fan stops when the door is open and
restarts immediately after the door closing.
ChildLock function
Activate the ChildLock function to lock the
buttons from unintentional operation.
1. Press Functions until the
corresponding icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.
DrinksChill function
The DrinksChill function is to be used to
set an acoustic alarm at the preferred
32 Progress
