Step 5 (optional): Install the Adjustable Legs
Install the six Adjustable Legs (3”, 6”, or 3” + 6”) by hand onto the adjustable bed frame in the locations shown on the
diagram below. Ensure the rubber feet are installed on the bottom of the completed Adjustable Leg assemblies.
Step 6: Connect the System to a Power Source
Connect the Control Box Power Cord, Power Supply and AC Power Cord together before connecting to an AC Power
Source.
Step 7: Setup the Wireless Remote
Use the 3 x AAA Batteries provided. Please wait 30 seconds after the system is powered on before operating. If the
Wireless Remote is not working, refer to the ‘Troubleshooting’ section.
P a g e | 10