Step 9 (optional): King Bed Control Options
Option A: Individual Control
Please note the following about this option:
•
Operate each adjustable bed completely independently.
•
Use dedicated Wireless Remotes for each.
•
You cannot synchronize motion between the two beds.
•
Not compatible with Bluetooth Smart Control.
Since a King or Split King configuration is comprised of 2 x Twin XL adjustable beds, simply operate them as if they were
two separate beds. Each Twin XL adjustable bed has its own fully independent Control System and Wireless Remote.
If you are proceeding with a Twin XL, skip all instructions for King/Split King Configuration and follow Twin XL
Configuration instead.
Option B: King/Split King Configuration
Please note the following about this option:
•
Can only use 1 x Wireless Remote for both adjustable beds.
•
Operate the beds individually or synchronously by toggling a switch on the Wireless Remote.
•
Compatible with Bluetooth Smart Control.
Initial Setup
1. Connect the Sync Cord to the ‘Sync’ ports of both Control Boxes.
2. Complete the Reset Procedure – refer to the ‘Control Guide’ section.
P a g e | 11
Step 8: Install the Mattress Retainer Bar
Install the Mattress Retainer Bar in the foot area of the adjustable bed. Insert Side 1 as illustrated on the diagram, before
inserting Side 2.
