Bluetooth Smart Control (adapter sold separately)
IMPORTANT:
Ensure QR code stickers provided with the Bluetooth Adapter are stored in a secure manner as they are
the only method for pairing to each unique device. We advise that a sticker be applied to the Bluetooth Adapter and/or
Control Box before operation.
Twin XL/Queen Configuration
1. Connect the Bluetooth Adapter to the Control Box port labelled ‘APP’.
2. Complete the Reset Procedure – refer to the ‘Control Guide’ section.
3. Install the Progressive Automations Smart Home application on your device through App Store (iOS) or Google
Play Store (Android).
4. Follow instructions on the Smart Home application to complete setup.
King/Split King Configuration
1. Identify the Control Box where the Quadruplex Connector side of the Sync Cord is connected to.
a. Quadruplex Connector: 4 x wires are visible at the end of the Sync Cord.
b. Triplex Connector: 3 x wires are visible at the end of the Sync Cord.
2. Connect the Bluetooth Adapter to this Control Box ‘APP’ port.
3. Complete the Reset Procedure
refer to the ‘Control Guide’ section.
4. Install the Progressive Automations Smart Home application on your device through App Store (iOS) or Google Play
Store (Android).
5. Follow instructions on Smart Home application to complete setup.
Battery Lock Wire (operation during power outage)
The adjustable bed may be operated for a short period using 2 x 9V batteries (not included) using the Battery Lock Wire.
1. Disconnect the Power Supply from DC Power Cord.
2. Connect the Battery Lock Wire to DC Power Cord.
3. Install 2 x 9V batteries on Battery Lock Wire.
4. Wait for 30 seconds before starting the adjustable bed operation.
P a g e | 15
