9
OPERATING EQUIPMENT SAFELY
§
Never allow persons to stand between power unit and mower while backing power unit
up to hitch the mower.
§
Before hitching mower to power unit, place transmission in neutral, set park brake, and
turn engine off. Remove the ignition key.
§
Make sure locking collar on PTO shaft is properly locked. If the PTO shaft comes off
during operation, personal injury or equipment damage could result.
§
Always install safety chains properly when hitching mower to power unit.
§
Tall grass can hide obstacles. Carefully walk the entire area to be mowed beforehand.
Look for debris, rocks, tree limbs etc. that will damage or be thrown by the mower
blades. Identify objects that cannot be removed. Set mower cutting height to avoid
contact.
§
Ensure that no bystanders are within 25 ft of mower when wing
transport locks are released.
§
Keep all bystanders well away from the machine when it is operating.
Always maintain a safe operating distance of 300 ft from personnel,
other equipment, or vehicles.
§
Never operate the mower with deflectors or guards removed. Mower
blades
can cause small objects and debris to be thrown from under the mower deck at high
speeds, up to 300 ft away. Objects ejected by the mower blades can cause severe injury.
§
Never tamper with safety devices or operate the mower with them removed. Check
proper operation regularly.
§
Always disengage PTO, turn power unit off and remove key before dismounting, for
any reason.
§
Never place hands or feet under mower deck when the mower is operating or power
unit engine is running.
§
Disengage the PTO when crossing gravel areas or roadways.
§
Disengage the PTO and turn power unit off upon striking any object. Inspect mower
and repair any damage before continuing.
§
If the equipment should start to vibrate abnormally during operation, stop the mower,
shut down power unit, and immediately check for the cause. Excess vibration is
generally an indication of a problem. Replace bent or damaged parts, do not attempt to
straighten a bent blade.
§
Use extreme care when operating on uneven terrain.
§
Reduce speed when operating on slopes during wet conditions, especially when making
sharp turns.
§
Do not use the mower in limited visibility (e.g. at dusk, in fog, heavy rain etc.). Mow
only in daylight or good artificial light.
§
Disengage PTO and ensure blades are completely stopped before raising wings.
§
Ensure transport locks are securely engaged before transporting mower with wings in
raised position.
Summary of Contents for 1212029
