Step 8: Setup the Wireless Remote
Use the 3 x AAA Batteries provided. Please wait 30 seconds after the system is powered on before operating. If the
Wireless Remote is not working, refer to the ‘Troubleshooting’ section.
Step 9: Install the Mattress Retainer Bar
Install the Mattress Retainer Bar in the foot area of the adjustable bed. Insert Side 1 as illustrated in the diagram, before
inserting Side 2.
Step 10 (optional): King Bed Control Options
Option A: Individual Control
Please note the following about this option:
Operate each adjustable bed completely independently.
Use dedicated Wireless Remotes for each.
You cannot synchronize motion between the two beds.
Not compatible with Bluetooth Smart Control.
Since a King or Split King configuration is comprised of 2 Twin XL adjustable beds, simply operate them as if they were
two separate beds. Each Twin XL adjustable bed has its own fully independent Control System and Wireless Remote.
If you are proceeding with a Twin XL, please skip all instructions for the King/Split King Configuration and follow the Twin
XL configuration instead.
Option B: King/Split King Configuration
Please note the following about this option:
Can only use 1 x Wireless Remote for both adjustable beds.
Operate the beds individually or synchronously by toggling a switch on the Wireless Remote.
Compatible with Bluetooth Smart Control.
Initial Setup
P a g e | 14
