3
BATTERY TYPE SELECTION
Please check your battery manufacturer’s specifications to select correct battery type.
The unit provides 4 battery types for selections: Gel, AGM, WET (conventional lead acid),
and Calcium.
There is a DIP switch at the back of the solar charge controller, this Dip switch is used for
presetting your battery type. Please refer to Figure 1.1 to make DIP switch setting for the proper
battery chemical; the factory default setting is at AGM battery type.
Figure 1.1:
Battery Type Setting via DIP switch
Note:
Once the Dip switch setting or external wire connection is finished, do not freely change
the DIP switch or external wire connected; otherwise it may damage your battery.
