english
53
www.projectiondesign.com
11 Storing and recalling data
The multi image processor system has powerful and flexible features for storing and recalling
calibration data. When a calibration is stored, the user can recall all calibration parameters at
any given time or on any given control PC. Calibration can be stored:
•
In the multi image processor unit
•
On the control PC. This is a copy of the data stored in the multi image processor unit
•
Both
When a calibration has been completed, the calibration must be accepted in the menu.
Accepting a calibration means the binary data is stored in the unit and will be used
automatically when the unit is powered on.
11.1 Storing/recalling calibration to/from the multi image processor unit
When storing calibration to the multi image processor unit, it will be saved in the internal
memory of the unit. Should the multi image processor unit or the control PC loose power
during calibration, the data can easily be recalled. To save the calibration to the multi image
processor unit click “Save Calibration” in the Calibration view toolbar, press Ctrl+S or select
“Save Calibration” from the file menu (Figure 11-1). Any calibration already stored in the multi
image processor unit will be overwritten.
Figure 11-1. Save current calibration to the multi image processor unit
If you want to recall your last saved calibration, click “Load Calibration” in the Calibration view
toolbar (Figure 5-1).
Summary of Contents for WB1920
